PCM Cooling Cushions & Pads

Multicares PCM Cooling Cushions & Pads use phase change material (PCM) to absorb heat and provide passive cooling for seating, resting, and pet bedding applications. Designed for reusable cooling without electricity during use, these products offer a practical solution for offices, vehicles, homes, outdoor settings, and pet comfort.

Available in different designs and configurations, our PCM cooling cushions and pads can be tailored to your product requirements. OEM/ODM and private-label options include dimensions, PCM transition temperature, core weight, cover fabric, colors, and printed branding.

Product Range

The PCM Cooling Cushion & Pad Range at a Glance

PCM Cooling Core

Close-up of the translucent phase change material core used in Multicares PCM cooling pads.

PCM Core

Target Markets

  • Home & Lifestyle Retailers
  • Bedding & Sleep Product Brands
  • Office & Ergonomic Seating Suppliers
  • Automotive & Mobility Accessory Distributors
  • Pet Product Brands & Retailers
  • E-commerce & Online Retail Brands

Key Features

  • PCM-Based Temperature Regulation
  • Passive Cooling Without Electricity
  • Reusable with Rechargeable PCM
  • Comfort-Oriented Surface Design
  • Condensation-Resistant Design
  • Custom Dimensions & PCM Options

Interested in This Range?

Get in Touch

Product Specifications

Premium PCM Pet Cooling Mat with Durable TPU Shell
Phase Change Material Durable and Waterproof Pet Cooling Pad

Applications

Best ForPet Cooling

  • Home Living & Sleeping Areas
  • Pet Travel & Car Seats
  • Outdoor Picnics & Camping
  • Post-Exercise Rapid Recovery
  • Veterinary Clinics & Recovery

Design & Fit

  • Self-Freezing
  • Universal Fit
  • Non-condensation, No Dripping
  • Rapid Recharge in Minutes
  • Constant Cooling at 26°C or 28°C for 1-2.5 hours,
  • Battery-Free
  • Safe & Non-Toxic

Key Specifications

Size40x30 cm / 15.7x11.8 inch
Weight310 g / 0.68 lbs.
MaterialTPU Shell; Phase Change Material.

Quality Assurance & Compliance

Learn more about our quality assurance and compliance support for PCM Cooling Cushions & Pads.

Quality Management System

Our quality management system is certified to ISO 13485 for medical device quality management.

Regulatory & Compliance Support

We support regulatory documentation for applicable markets, including CE, FDA and EUDAMED requirements.

Social Responsibility

BSCI social compliance audit documentation is available.

Production operator in protective workwear handling sealed gel packs on a conveyor beside a pneumatic filling machine on the Multicares production line

Product Quality Inspection

Each production run is checked for appearance, sealing, print, dimensions and fill weight against approved requirements. Applicable products also undergo leak or pressure checks, and non-conforming items are removed before packing.

Traceability & Corrective Action

Production lot records link each product to its model, production details and shipment. Customer feedback is reviewed by the quality team, and corrective actions are tracked through resolution.

Looking for a reliable OEM/ODM partner?

Share your product requirements, target market and intended use. We’ll help clarify the documentation and regulatory requirements that may apply.

Contact Us

PCM Cooling Cushions & Pads FAQ

A PCM cooling cushion holds a sealed phase-change core that absorbs latent heat while the phase change material melts, so the surface stays at a steady temperature instead of warming up gradually. It needs no power or water during use, and it recharges by dropping below its phase-change temperature. The range covers seating, resting and pet bedding — office chairs, car seats, wheelchairs, sofas, beds and pet mats.

A gel seat cushion starts colder and warms gradually, so its cooling fades as it absorbs heat. A PCM cooling cushion is designed to hold one set temperature for the whole cooling window, and it recharges whenever the ambient temperature falls below its transition point — a freezer is not the only option. The same comparison applies to pads used on a bed, sofa or pet bedding.

Approximately 1–2.5 hours of constant cooling at the selected transition temperature, depending on ambient temperature, the heat released by the user, the load on the pad and the cover in use. Usable time shortens as ambient temperature and body load rise — faster on an office chair or a truck cab, slower when the pad is used for resting on a bed or sofa.

They do not need a freezer. Any environment below the PCM transition temperature recharges the core, and cold water works as well. If you need a faster recharge, a refrigerator or freezer will do it in around 15–30 minutes.

No — the surface holds its set temperature rather than dropping near 0 °C. Condensation only forms when a surface is colder than the dew point of the surrounding air, around 14–17 °C in a typical 25 °C room, and these pads sit at 22–28 °C, so the surface stays dry. Ice packs, at around 0 °C, fall below the dew point and sweat. The PCM core is also sealed in a welded TPU shell, so moisture cannot reach the fill.

Yes — we make PCM cooling pads designed specifically for pets, supplied for pet bedding, crates and floor mats. The fill is non-toxic and sealed in a welded shell. A pad is still not a chew toy, so it should not be left with pets that bite bedding. Where chewing is a concern, we can supply a thicker outer cover with the pad, which makes it harder to bite through and reduces the risk of a puncture. For specific pet sizes and styles, see our pet cooling mats.

Dimensions, shape, quilting, PCM transition temperature, core weight, cover fabric, color and printed branding are specified per project. Formats include seat cushions, mats and smaller pillow-style pads. 22 °C, 26 °C and 28 °C are available as standard, and we also hold a wider range of transition temperatures beyond those listed here — tell us the target temperature your market needs and we will confirm the closest available option.

It is currently supplied as an everyday cooling product rather than a medical device, and we do not make therapeutic claims for it. If your market needs particular documentation, tell us and we will confirm what is available.

More Buying Information

Need more information?

Find answers to common questions about customization, MOQs, samples, lead times, quality control and product documentation in our Ordering & Customization FAQs.

View Ordering & Customization FAQs

Related Product Ranges

Other Multicares ranges that are often sourced alongside this one.

Contact Us